Accessories

Sakuma Reflective Tape will show up rod tips from distance even under low light, and can also be used on clothing and luggage. This super-reflective tape also has super-adhesive on the back, so once its in place it will stay there. This is one of those small but essential items for fishing trips.

The heavy elastic is best used for binding bigger baits. Helps to keep hook points clear for better presentation. Can easily be removed by hand and is more resilient to deterioration than other elastics.

Light bait elastic is ideal for smaller soft baits like crab and shellfish. This will not only make the bait more secure on the hook but will also streamline baits when casting for the shore angler.

Gemini Genie Baiting Needles are made from hardened marine grade stainless steel. Each Genie Baiting Needle incorporates a deep holed, flush stainless steel ferule, where your hook point will locate into, the other end of the Genie Baiting Needle has a rounded design (this is the end your baiting is threaded onto) that is less inclined to pierce through the sides of your bait whilst being threaded. Each Genie Baiting Needle comes with a

The Splash Down is excellent for off the ground casting. It locks the baited hook directly behind the sinker, vastly improving bait presentation and eradicating those frustrating moments when your hook bait becomes unclipped mid-cast. The Splash Down range is produced using the highest quality materials here in the UK. System 100+ Splash Down Assembly Kits are to be used in conjunction with the Gemini System 100+ Splash Down Mould. These assembly kits contain enough components for you to make 10 Splash Down Sinkers.

This Complete DIY assembly kit is for use in conjunction with the System 100+ Breakout sinker mould. This assembly kit comprises of 10 short tail wires, 40 standard breakout grips, 10 breakout heads and PVC.

The perfect bite indicator for rod tips, with a distinctively strong glow lasting up to 45 minute per charge. This easy to apply glow in the dark self-adhesive tape is also suitable for application to a wide variety of fishing equipment. The glow in the dark facility is easily rechargeable with torch, flash, sunlight or similar.

A highly reflective white, self adhesive tape, for the rod tip, giving excellent bite indication. (As used on high visibility safety clothing). *Tip: Cut the tape length ways into 7mm strips and spiral around the rod tip

Reflective Rod Tape

These booms are an extension of the Gemini Genie Link Clip and ideal for making a famous ‘flying collar rig’, a rig used by boat anglers when wrecking and reefing. These booms are available in three sizes; 4”, 6.5” and 9”.

The Spring Loader boasts the ability to package both single and cocktail baits in tight, well formed, robust packages with minimum effort or skill required.

Ideal for a second rod or for putting the rod low when estuary fishing or close in for flatties etc, use one on each leg to hold spare rod. fits all Ian Golds and Breakaway tripods This sliding head fits on any 1/2" diameter round tripod leg and allows you to place a rod low to the beach "quiver tip" style. it is also a handy place to rest a spare rod to keep it safe and out of the way

Reel Grease is part of the right series of products to properly service all of your Abu Garcia reels.

Genuine high quality Ian Golds double head to fit any of the Golds tripod range. Supplied with the bracket needed to fit either the angle or round tripod leg.

A plastic folding trace hanger which fits between the two front legs of the tripod. The hanger will hold up to 4 traces so you can have a variety of different rigs baited and ready to go.

Penn Rod and Reel Cleaner 355ml is a specially formulated cleaning solution designed to remove dirt, salt, and grime from fishing rods and reels, helping to maintain performance and appearance.

Plastic sliding leg lock which locks all three legs together to increase the stability of the tripod. Particuarly useful on hard surfaces such as piers and promanades.

Penn Precision Reel Grease 2oz Tub is a high-performance lubricant designed to protect fishing reels from corrosion and wear while ensuring smooth, reliable operation. Made in the USA

Using a proprietary technology and formula acquired in 2011, PENN oil, grease and cleaner are built to lubricate and prevent corrosion in saltwater environments.

Metal coasters will hold most reels securely in place and allow you to set the reel in the perfect position to suit your needs. The plastic moulding helps to protect your fingers from the sharp metal and the easy to grip adjusting knobs make mounting/removing your reel easy These Breakaway coasters are very comfortable and some of the best we have seen. Sold in pairs (Sizes shown are the Minimum and Maximum Diameter)

The Breakaway Cannon is a small mechanical device that attaches to the blank of your rod to aid in holding your line down when beach casting until the Power Stroke is complete.

The Rapala Hook Sharpener features a retractable design for compact storage. The Sharpening stone is made from fine grit Aluminium Oxide and the grooved design allows you to restore hook points in seconds. Supplied with neck lanyard.

Sharp hooks can often be the key to converting bites into fish on the shore or boat. Our small, compact hook sharpener has been designed to offer a convenient tool for making sure hook points are at their top condition all the time. This rectangular hook sharpener has been made from a stainless steel base, which has been coated with fine, diamond particles which are securely bonded to the main frame. This gives a fine, gritty surface, perfect for sharpening hooks and even small knives and scissor blades. The main gritty surface is perfect for honing up larger hooks, whilst the grooved section is perfect for smaller hooks and refining hook points. It comes with a metal chain that can be attached to a keyring or other tackle accessories and even around the neck for quick access. A simple tool that can make a massive different to the anglers catch rate.

Breakaway Sea Match Bait Slider is a light weight slider which is ideal for a number of different applications. The most popular use is to cast out a standard one or two hook rig and then use the slider to work another hook out from the edge. This allows you to cover more of the sea bed and for example fish for whiting at range whilst also targeting flounders in the gutter. In the summer months it is a hand way of sending out a float to look for garfish and scad whilst still fishing a traditional bottom rig. In fact the only real limit to this sliders use is your imagination! To work correctly you first need to make sure you are using a good grip sinker which is fastened out on the sea bed. You then just clip the slider on to your main line and then slide it out to the required distance by raising and lowering the rod tip. The slider has a quick clip at the top to allow you to clip it securely on to the line. There is a swivel to attach the rig and a little bait clip which allows you to rest the hook on to reduce the risk of a long trace tangling on the way out into the sea.