Fox

The Fox Splicing Needle is designed to neatly splice loops into leadcore or 30lb Submerge leaders. The needle features a micro engineered, hinged gate which closes to capture the fibres and prevents snagging during the splicing process. The needle shaft is constructed from ultra low diameter stainless steel and this makes the needle ideal for hair rigging small, soft baits without splitting or tearing.

Key Features Perfect for small boilies &particle baits Soft grip handle

•The Heavy Needle is perfect for larger boilies and harder baits.

The Gated Needle is perfect for splicing 45lb submerge and general hook baits

Key Features Lead-free Leader Material That Features a Unique Fleck Camo Pattern to Perfectly Blend into all Lakebeds Incredibly Subtle and Sinks Like a Brick Hugging the Contours of the Lakebed Easy to Splice (use the Yellow Edges Needle for the 40lb and 50lb and the Blue Edges Needle for the 30lb - Alternatively the Edges Easy Splice Needle is Perfect for all Breaking Strains) Available in 30lb, 40lb and 50lb 10m per spool

Fox Braided Leader Line for Carp Fishing • Colour as picture: camouflage, very suitable for different water floors. • Lead-free lead material, easy to splice. • Very soft, yet quickly sinking, so that the cord adapts to the contours of the water • Box contents: 10 m braided leader line with selected load capacity.

The Fox EDGES™ Tungsten Chod Bead Kit has been manufactured in a semi translucent khaki colour to blend in on the lake bed and are weighted to ensure maximum rig concealment. Designed for use direct onto the mainline without a leader. During the fight the bead slides down the mainline onto the buffer sleeve. The buffer sleeves also feature a moulded hole to allow the rig to be set up with a drop off lead.

This kit creates the perfect running rig set up allowing the lead to hang straight on the cast. The lead can be locked into position with the peg provided or fished drop off style with a PVA stop, available separately.

FEATURES •Designed for use with Fox inline leads to allow them to be fished drop-off style. •Simply remove the insert from the lead and cut off the thin section, place the rubber back into the bottom of the lead. The Insert from the Drop Off kit then threads onto your line and is placed into the top of the lead. When you get a take the lead will eject but the insert will stay on the line. •Comes supplied with a tail rubber if you want to increase the amount of pressure required to eject the lead. •5 inserts and 5 tail rubbers per kit •Perfect when fishing inline leads on weedy/snaggy lakes.

Key Features Discreet &buoyant bait stops Fit snugly against the curved surface of any boilie Securely hold the hair in place 200 Stops per pack

Key Features Discreet &buoyant bait stops Fit snugly against the curved surface of any boilie 120 Caps per pack

Key Features Allow for a quick change of hook baits on your rig  Supplied in 3 sizes  32 x Small  32 x Medium  16 x Large  Colour: Clear

Fox Edges Pellet Pegs, available in 11mm, 13mm or 21mm & clear in colour! Ideal for the perfect hookbait presentation.

ANTI TANGLE SLEEVES XL Designed to prevent tangles and to cover Kwik Change Swivels these extra long sleeves are ideal for long zig rigs. ANTI TANGLE SLEEVES MICRO Designed to prevent tangles and to cover Kwik Change Swivels, the micro sleeves are ideal for PVA bag fishing or quick change stiff booms. Fox Anti-Tangle Sleeves are designed to fit swivel eyes and create anti-tangle set ups pushing the rig away from the lead and mainline when casting.

These adaptors are curved to create the perfect angle for a Withy Pool Rig. At the end of the sleeve it features micro serrations to mould putty over for a brilliantly effective, delicate presentation. For threading onto the hooklength we suggest the use of a Fox Splicing Needle.

•Hassle-free solution for creating the perfect line aligner presentation •Eliminates need for shrink tube •Features Trans Khaki colouration •Simply slide an Aligna down your hooklink and over the eye of your hook (we suggest using the Edges Splicing Needle to thread onto the hooklength) •Creates an angled extension to the hook that helps it turn and catch hold in the carp’s mouth •Available in Long and Short versions •Both versions available in two sizes: One for hooks sizes of 10-7 and one for hook sizes of 6-1 •10 per packet

The moulded, low profile stops fit onto the hook shank acting as a buffer for Micro Ring Swivels or Rig Rings. Designed to create the ultimate in modern anti-eject carp rigs. EDGES™ The new Edges range is made up of a whole host of end tackle products that have each individually been designed to make the rigs you tie better than they have ever been. Within the range you will find leaders, hooklinks, clips, sleeves, shrink tube and gizmo’s that have been designed in conjunction with their consultant and underwater diver Rob Hughes, so that their colours and appearance best match a whole host of different lakebed make-ups – a massive ‘edge’ in itself!

Fox Edges Tapered Mainline Stoppers Not only do these help with sinking your mainline they have a taper to allow end tackle to easily pass over making them totally safe. Ideal for ‘Naked Chod’ style rigs in conjunction with Fox Tungsten Beads - 5mm.

Key Features Maximum density Keeps hooklink on the lakebed for maximum rig concealment 9 per pack

•These bait inserts push into your hook bait to prevent the hair eroding it during casting and retrieving. Using the serrations they can be trimmed to fit 12, 14,16 and 18mm baits. The insert does not protrude through the bottom of the bait allowing the bait to grip the hair. •10 per pack.

TAPERED BORE BEADS 4mm Designed specifically for direct use onto leadcore and Submerge leaders. Ideal for positioning chods and helicopter style set ups. TAPERED BORE BEADS 6mm These shock absorbing beads have a stepped taper to sit neatly over swivels and can be used with various presentations

Fox EDGES™ Tungsten Beads For maximum rig concealment use tungsten beads to add weight to rigs keeping them pinned to the lake bed. When used with Tungsten Mainline Sinkers they are perfect for ‘Naked Chod’ style rigs.EDGES™The new Edges range is made up of a whole host of end tackle products that have each individually been designed to make the rigs you tie better than they have ever been. Within the range you will find leaders, hooklinks, clips, sleeves, shrink tube and gizmo’s that have been designed in conjunction with their consultant and underwater diver Rob Hughes, so that their colours and appearance best match a whole host of different lakebed make-ups – a massive ‘edge’ in itself!

Shrink tube reduces in size by two thirds when immersed in boiling water and is essential for a multitude of end tackle applications.

Key Features Perfect for keeping the hair tight to the hook shank, or Making adjustments to the position of the hair Length: 1.5m

Key Features Scaled down &refined for a delicate presentation T-bar design Securely fixes size 10 swivel inside the clip Trouble free lead ejection every time Colour: Khaki Size: 10 10 per pack