Terminal Tackle

Built to raise to the surface as fast as possible when retrieving, these are a fantastic tool that can cast super accurately and helps you to cast further too! Designed with a super-smooth profile on the exterior, in an optimum aerodynamic shape. This shape not only helps gain distance and accuracy on the cast, but also helps them retrieve smoothly. The body is also designed to come to the surface as quickly as possible on the retrieve, which is a great advantage when fishing near ledges, shelves or snags. The Registered-Design line attachment is freshly developed to avoid tangles, making the rig as simple as ever to give less scope for complications and breakages. This is made from a loop of 0.55mm Mouth Trap filament, which is super strong without any crimps. This runs through the body, making a clean, tangle-free loop. You simply attach it to the rig via a Snap Swivel, which leaves the feeder hanging central for optimum casting every time.

Guru X-Change Slimline Distance Feeders, After the popularity of the X-Change Feeder Range launched just over a year ago, further development continued to meet demands of the modern anglers looking for some slimmer, smaller additions with all the same key features to fit a void in feeders. Perfect for times when smaller amounts of feed are needed, ideal for roach and skimmer work in the UK and Ireland, and the ultimate winter and Springtime feeder. Three sizes cater for all eventualities when smaller feeders are needed, from the Mini cage for tiny amounts of feed, to the small and medium. The Slimline Range is born! Being weight forward, the Slimline Feeders fly like absolute bullets, allowing anglers to fish at range with small feeders, and cast super accurately with ease!

The In-Line Banjo XR Feeder is an evolution from the popular Dura Banjo feeder and is the perfect option for carp, skimmers and F1’s when you want to protect your feed more than on a standard Method Feeder.

These durable rubber stops have a multitude of uses for float and feeder fishing. They’re so tight that, once slid off the convenient sprew, they won’t slip, even on fine-diameter line. They are available in three sizes, small (5mm), medium (6mm) and large (7mm).

The In-Line Banjo XR Feeder is an evolution from the popular Dura Banjo feeder and is the perfect option for carp skimmers and F1 s when you want to protect your feed more than on a standard Method Feeder.

The In-Line Banjo XR Feeder is an evolution from the popular Dura Banjo feeder and is the perfect option for carp skimmers and F1 s when you want to protect your feed more than on a standard Method Feeder.

The same super sharp, trouble free tool is fantastic for all kinds of baits, such as bread, meat and even boilies. Perfect for lots of summer tactics!

Guru Super Tight Line Stops. These line stops from Guru are a simple but vital piece of tackle for a wide variety of rigs. Supplied in packets of 12 and in three different sizes these line stops are a great addition to any rig.

Guru X - Safe Method Feeder, Traditionally, there was no particular science to hook bait placement within the method ball and your bait could even become trapped inside or under the feeder frame. Guru has, quite literally, turned this upside down. Commercial master Steve Ringer engineered a ground-breaking hook bait platform, which sits on the opposite side of the feeder to the main weight loading, ensuring that the hook bait sits on top of the feeder cast after cast.

These floats are made from high quality 10mm diameter balsa wood, with a carbon stem running through the length of the float to provide extra strength. They are coated with a high-tech varnish to give further strength and durability.

These floats are made from high quality 10mm diameter balsa wood, with a carbon stem running through the length of the float to provide extra strength. They are coated with a high-tech varnish to give further strength and durability.

These floats are made from high quality 10mm diameter balsa wood, with a carbon stem running through the length of the float to provide extra strength. They are coated with a high-tech varnish to give further strength and durability.

Drennan Silverfish Pellet Hooks To Nylon, At size 18 & 20 the wide gape and short shank can be virtually buried inside the pellet. The wide gape at these sizes also allows double maggot or castor to sit perfectly so few silverfish are lost. At size 12 it is big enough to hold two small pellets, one sits at the bottom of the bend and the other above it on the shank leaving the hook point just showing

Drennan Silverfish Pellet Hooks To Nylon, At size 18 & 20 the wide gape and short shank can be virtually buried inside the pellet. The wide gape at these sizes also allows double maggot or castor to sit perfectly so few silverfish are lost. At size 12 it is big enough to hold two small pellets, one sits at the bottom of the bend and the other above it on the shank leaving the hook point just showing

Drennan Silverfish Pellet Hooks To Nylon, At size 18 & 20 the wide gape and short shank can be virtually buried inside the pellet. The wide gape at these sizes also allows double maggot or castor to sit perfectly so few silverfish are lost. At size 12 it is big enough to hold two small pellets, one sits at the bottom of the bend and the other above it on the shank leaving the hook point just showing

Drennan Silverfish Maggot Barbless Hooks To Nylon, Lightweight but strong, these high carbon steel wire hooks are heavily forged for maximum strength and to reduce the spring in the gape reducing fish loss when bagging up on small silverfish. The long, slightly curved point also helps hooking and holding. Tied to 25cm of extra strong, low diameter mono

Drennan Wide Gape Carp Barbless Hooks To Nylon, Drennan Wide Gape Carp Hook is perfect for all types of commercial fishing with big baits such as paste, meat and catmeat in the larger hook sizes, or corn and pellet in the smaller hook sizes. Heavily forged for extra strength. The curved needle point is exceedingly sharp and durable, the extra wide gape and short shank makes this a really useful pattern.

ESP Quick Change Uni Link, Perfect for the highly effective 'Ronnie Rig', the slight opening in the crook makes it easy to attach the hook and the smooth rotation provides 360-degree movement. The two different sizes can be tailored to different sized hooks and baits to create a perfectly balanced presentation. These swivels can also be used on a helicopter rig where the crook allows quick change of a looped hooklink and the large ring provides a safe set up. Matt black finish.

One ring Provides the all-important flexible hinge for the hooklink while the other, the attachment for the leadcore leader. These setups are particularly effective when stalking carp in weedy margins as the swivel easily pulls out to its housing allowing the lead to fall away.

Guru's new Super Tight Line stops have been designed to grip even the thinnest lines very tightly, meaning you need to use less on your line than ever before. Each size has its own use: the smallest size is ideal for locking small wagglers onto the thinnest of mainlines. If you’re using a tiny loaded waggler to cast to surface-feeding carp or silvers on the drop, for example, or locking small surface controllers. Medium stops are perfect for locking off medium sized wagglers and also for anchoring small feeders and bombs just where you want them to be fixed. A really easy cage feeder or bomb rig involves using a medium stop as a buffer with a bead between the feeder and stop. You can also adjust the length of the hook link by sliding the stop up and down.The large size comes into its own when you need to anchor bigger feeders, bombs and the biggest of floats securely in place, particularly pellet wagglers. When you’re casting big, loaded pellet wagglers, the bigger stops in pairs are perfect for keeping everything locked into place. Because the Super Tight Line Stops are so tight fitting, it is advised that you moisten your line before adjusting each stop individually.

PRESTON IN-LINE QUICK CHANGE BEADS

Amazingly these weights cast significantly further and with greater accuracy than lead shot!  There are 12 sizes available from 0.5 gram up to 4 gram, each weight is size engraved and has a dead central bore which is lined with silicone tube to avoid reel line damage.

Designed to fit inside any of the ICM Feeders, creating a safe in-line set up. Allows you to quickly and easily change your hooklength. 6 per pack​​​​​​​

Preston Innovations ICS Quick Change Beads, ideal for use used with elasticated and inline feeders. They provide a rock solid connection between your feeders and hooklengths. Simply push back the sleeve, attach the hooklength and slide back the sleeve for fast and efficient hooklength changes.