Carp Fishing Pods & Banksticks

They have been constructed from a robust rubber that grips to the butt of your rod with impressive strength. This grip is greater than most other models available as despite their small size the Fox Butt Grips are actually in contact with more of the butt’s surface area than most. As mentioned previously they are very small, which when coupled with their minimalist styling makes them every tackle tarts dream back rest! There are two models available, which are Small for standard abbreviated handles and Large for full Duplon and cork handles.

Sonik Stanz Rubber Rod Grip Large

A lightweight compact rod pod addition to the Fox lack Label range of high quality bankware. The black label slim pod is ideal for quick sessions and staying mobile. With multileg adjustment allowing you to spread the legs to improve stability. They come supplied in a handy carry bag with room to pack the buzzbar with a set of alarms attached for super quick deployment.

The rogue Pack Pod has been designed to be lightweight and super-compact in its packed down state, yet can be quickly set up to become a super-stable, full sized, three rod pod. Easily able to fit in a small carryall, rucksack or side pocket, the Rogue Pack Pod is the perfect companion for any angler who wishes yto travel light or of fishes swims where use of the bank sticks is not possible, such as hard standings and platforms. Alternatively the buzz bars can be used in conjunction with the bank sticks provided to produce a goal-post stet-up or a single stick set-up.

A unique fixed length design available in two rod 4", 5" and 6" and three rod 8", 10" and 12". The ESP buzz bars feature stainless inserts for permanently aligning alarms and back rests quickly and easily without the need for locking rings or rubber O rings etc. Each buzz bar is supplied with a tool for securing the inserts. Machined from strong solid bar in ESP’s own UK factory with a black hard anodised finish.

A unique fixed length design available in two rod 4", 5" and 6" and three rod 8", 10" and 12". The ESP buzz bars feature stainless inserts for permanently aligning alarms and back rests quickly and easily without the need for locking rings or rubber O rings etc. Each buzz bar is supplied with a tool for securing the inserts. Machined from strong solid bar in ESP’s own UK factory with a black hard anodised finish.

A unique fixed length design available in two rod 4", 5" and 6" and three rod 8", 10" and 12". The ESP buzz bars feature stainless inserts for permanently aligning alarms and back rests quickly and easily without the need for locking rings or rubber O rings etc. Each buzz bar is supplied with a tool for securing the inserts. Machined from strong solid bar in ESP’s own UK factory with a black hard anodised finish.

A unique fixed length design available in two rod 4", 5" and 6" and three rod 8", 10" and 12". The ESP buzz bars feature stainless inserts for permanently aligning alarms and back rests quickly and easily without the need for locking rings or rubber O rings etc. Each buzz bar is supplied with a tool for securing the inserts. Machined from strong solid bar in ESP’s own UK factory with a black hard anodised finish.

A unique fixed length design available in two rod 4", 5" and 6" and three rod 8", 10" and 12". The ESP buzz bars feature stainless inserts for permanently aligning alarms and back rests quickly and easily without the need for locking rings or rubber O rings etc. Each buzz bar is supplied with a tool for securing the inserts. Machined from strong solid bar in ESP’s own UK factory with a black hard anodised finish.

ESP Bank sticks are available in four extending lengths – 9”-13”, 12”-19”, 15”-24” and 20” – 35” to cover most scenarios. Super strong yet lightweight they are machined and assembled in ESP’s own UK factory. Constructed using an extra-long machined stainless point and combined with 12mm diameter hard anodised aluminium they will penetrate even the hardest ground.

ESP Bank sticks are available in four extending lengths – 9”-13”, 12”-19”, 15”-24” and 20” – 35” to cover most scenarios. Super strong yet lightweight they are machined and assembled in ESP’s own UK factory. Constructed using an extra-long machined stainless point and combined with 12mm diameter hard anodised aluminium they will penetrate even the hardest ground.

ESP Bank sticks are available in four extending lengths – 9”-13”, 12”-19”, 15”-24” and 20” – 35” to cover most scenarios. Super strong yet lightweight they are machined and assembled in ESP’s own UK factory. Constructed using an extra-long machined stainless point and combined with 12mm diameter hard anodised aluminium they will penetrate even the hardest ground.

ESP Bank sticks are available in four extending lengths – 9”-13”, 12”-19”, 15”-24” and 20” – 35” to cover most scenarios. Super strong yet lightweight they are machined and assembled in ESP’s own UK factory. Constructed using an extra-long machined stainless point and combined with 12mm diameter hard anodised aluminium they will penetrate even the hardest ground.

Padded protection for buzz bars, bite alarms, receiver and accessories. The main compartment accommodates a buzz bar with alarms attached and a receiver with a separate Velcro pocket for a rear buzz bar. There is a clear zipped pocket for bobbins and accessories.

These flexible Dual Gripper Butt Rests are designed to securely retain the rod in most fishing situations – holding onto the butt and stopping the rod from being pulled from the rear rod rest on ‘the bite’, whilst releasing smoothly on the strike.

Now with new improved lock up. Non-twist rear heads designed to fit Tru-Lok Banksticks, these Tru-Lok Gripper Heads can be attached and released quickly.

The Wychwood Solace NTS (No Thumb Screws) Fixed Buzz Bars are made from a 16mm Diameter, strong aluminium, anodized in a matte black finish. Each buzz bar incorporates a 2BA thread on each upright, designed for you to screw your bobbins/indicators into. They have our very own ergonomically designed knurling pattern the alignment collars. They three male threads enable these to be fished as a goal post style set up.

The Wychwood Solace NTS (No Thumb Screws) Banksticks are made from a 16mm Diameter, strong aluminium, anodized in a matte black finish. Each stick incorporates a 2BA thread designed for you to screw your bobbins/indicators into. They have our very own ergonomically designed knurling pattern on the height adjustment locking mechanism and also the alignment collars. Each stick has a spike on the internal upright stick, meaning they can be used in hard ground.

The Wychwood Solace NTS (No Thumb Screws) Banksticks are made from a 16mm Diameter, strong aluminium, anodized in a matte black finish. Each stick incorporates a 2BA thread designed for you to screw your bobbins/indicators into. They have our very own ergonomically designed knurling pattern on the height adjustment locking mechanism and also the alignment collars. Each stick has a spike on the internal upright stick, meaning they can be used in hard ground.

The Wychwood Solace NTS (No Thumb Screws) Screw Points Banksticks are made from a 16mm Diameter, strong aluminium, complete with screw point. Each stick incorporates a 2BA thread designed for you to screw your bobbins/indicators into. They have our very own ergonomically designed knurling pattern on the height adjustment locking mechanism and also the alignment collars. Each stick has a spike on the internal upright stick, meaning they can be used in hard ground.

The Wychwood Solace NTS (No Thumb Screws) Screw Points Banksticks are made from a 16mm Diameter, strong aluminium, complete with screw point. Each stick incorporates a 2BA thread designed for you to screw your bobbins/indicators into. They have our very own ergonomically designed knurling pattern on the height adjustment locking mechanism and also the alignment collars. Each stick has a spike on the internal upright stick, meaning they can be used in hard ground.

The Wychwood Solace NTS (No Thumb Screws) Fixed Buzz Bars are made from a 16mm Diameter, strong aluminium, anodized in a matte black finish. Each buzz bar incorporates a 2BA thread on each upright, designed for you to screw your bobbins/indicators into. They have our very own ergonomically designed knurling pattern the alignment collars. They three male threads enable these to be fished as a goal post style set up.